Glass Wool Production Line

Glass Wool Production Line

Brief Introduction
Flow Chart
Main Parameters
Application
Glass wool is a kind of insulation material with excellent characters. It is made of natural ores such as quartz sand, dolomite, feldspar, limestone and so on, which are melted into glass fluid by adding in accessories such as calcined soda and borax and then drawn, blown or thrown into very thin fibers by external force under fusing state. As a kind of inorganic fiber, glass wool has the following basic characteristics:
1. Possessing good thermal insulation performance under both high and low temperature.
2. Neither burns, nor gives off harmful gas, so it is recognized as "statutory incombustible material" by many countries.
3. Possessing uniform resilience force.
4. Possessing sound-absorption performance from intermediate/ low frequency to high frequency and excellent noise reducing effect.
5. With low moisture absorption rate under humid conditions.
6. With low coefficient of linear expansion.
7. With low aging rate, being able to maintain the original performance after long-time use.
8. Possessing excellent handling characteristics.
A complete Glass Wool Production Line consists of different machinery and equipments with special functions. Through a series processing, quartz sand is transformed into glass fiber, then into glass wool panels or felt.
TYPE UNIT HIM-GW-3 HIM-GW-5 HIM-GW-8 HIM-GW-10 HIM-GW-15
Capacity mt/a 3000 5000 8000 10000 15000
Workshop(LxW) 75x15 85x15 90x15 95x20 100x25
Size(LxWxH) 65x10x14 75x10x14 80x10x14 85x15x14 90x20x14
Weight mt 180 190 200 210 300
Power kw 630 750 950 1000 1300
Power Source 220V/380V, 50HZ

Main Materials
1.Quartz sand: Its main composition is SiO2, content of which is more than 90%.
2.Feldspar: It can be classified into potash feldspar albite according to its chemical composition. Al2O3>15%, SiO2<70%, Fe2O3<0.3%, R2O>10%.
3.Dolomite: MgO>20%, CaO<32%, Fe2O3<0.15. Dolomite is water-absorbent, so it should be stored in dry places.
4.Calcined soda: Na2CO3>98%, NaCl<1%, Na2SO4<0.1%, Fe2O3<0.1%.
5.Borax (Na2B4O7.10H2O): B2O3>35%, Fe2O3<0.01%, Na2SO4<0.02%.
6.Limestone: CaO≥50%, Fe2O3≤0.15%.
7.Cullet: Broken and non-conforming glass products as well as glass chops made by chilling vitreous fluid in water, whether they are glass scraps produced in production or glass waste rejected in society, all can be used as raw materials for glass.


Specification of Glass Wool Products
PRODUCT DENSITY (kg/m3) DIMENSION, mm
Length Width Thickness
Board 25~100 1000~10000 500, 600, 630 20~100
Felt 10~28 1000~15000 1000, 1200 30~150
Pipe Cover Density Length Inner Diameter Thickness
10~18 1000 18~315 30~100
Product Catalog